Pool Robot AquaForte M30 new, original packaging RRP 990€

Pool Robot AquaForte M30 new, original packaging RRP 990€

Pool Robot AquaForte M30 new, original packaging
Product information "Pool Robot AquaForte M30"
Cordless and powerful: battery-powered pool robot for floor, walls and waterline. For pools up to 30 m³.
More and more manufacturers are bringing high-quality cordless pool robots to the market that can convince both in terms of battery runtime and pool cleaning performance.
The AquaForte is exactly such a convincing example. With its different cleaning runtimes, optimized path-finding routine and automatic shut-off, it offers a comprehensive all-round package for thorough cleaning of your pool. And all of this without annoying cable clutter.

TIP: When the pool robot has finished its work or the battery is running low, it automatically climbs the nearest wall and waits there to be removed. You can also command this via the app.
To retrieve the device from the pool, use the supplied hook. This can also be easily combined with all common telescopic poles.

The AquaForte M30 comes with a full 3-year manufacturer warranty.

Easy operation, also via app
A pool robot should take work off your hands. A basic requirement is that the device is easy to operate. Therefore, the AquaForte relies on an intuitive user interface that enables all relevant settings within seconds and with a few simple steps. This allows you to quickly and easily set both the runtime and the desired program.
If required, you can also make these settings remotely via the app.

You can choose between 3 cleaning cycles: 0.5 hours, 1 hour or 2 hours. This allows you to adjust the cleaning time to the degree of soiling or the time until the pool party.

Optimized path-finding and AI for optimal cleaning
In order for the pool robot to make optimal use of its available battery capacity, it works with AI-controlled path-finding. This allows it to cover the pool using the shortest route, clean all areas and still use as little energy as possible.

The DC inverter motors typically operate at less than 50% power, which not only saves energy but also extends the life of the device.

Vacation mode for a clean pool when you return
Although it is recommended not to leave the device in the water for an extended period, the vacation mode offers an optimal opportunity to return to a clean pool after a longer absence.

You can choose between 3 different modes: cleaning every 24 hours, every 48 hours or every 72 hours. Depending on the length of your absence, this ensures that the battery runtime is truly sufficient.

IMPORTANT: You can also use this pool robot in saltwater pools with a salt content of up to 0.5%.
However, please note that the device must be thoroughly cleaned both inside and out after use.

Features and advantages of the AquaForte M30:
Cordless pool robot with powerful battery
Cleans floor, walls and waterline
Suitable for pools of 15 - 30 m³
Battery runtime when cleaning the pool floor: approx. 3 hours
Battery runtime when cleaning floor, wall and waterline: approx. 2 hours
Battery charging time: approx. 2 hours
Cleaning modes:
Pool floor
Pool floor, wall and waterline
Cleaning cycles: 0.5 / 1 / 2 hours
Vacation mode: automatic cleaning every 24 / 48 / 72 hours
Includes hook for removing the device from the pool
Optimal water temperature: 0 - 35°
Filter volume: 3.2 liters
Filter fineness: 180 µm
Pump capacity: 20 - 10 m³/h
Power consumption: 30 - 110 W
Movement speed: 12 m/min
Number of drive motors: 2
Charging input: 90 - 265 V AC 50/60 Hz
Charger output: 25.2 V / 1.2 A
Charging power: 72.5 W
Net / gross weight: 10.4 / 14.6 kg
Dimensions (LxWxH): 49.5 x 39.5 x 26.5 cm